てるてるボーイズ(おすすめch紹介)

てるてるボーイズ(おすすめch紹介) チャンネル紹介
Sponsored Link

Sponsored Link

金田バイク ホイールカバーステー製作と、今後の工程報告 AKIRA 金田のバイク製作プロジェクト

金田バイク ホイールカバーステー製作と、今後の工程報告 AKIRA 金田のバイク製作プロジェクト  (c) てるてるボーイズ

(c) てるてるボーイズ 今回使用したガラス&ポリマーコーティング剤LEO COAT の公式ホームページはこちらから https://leocoat.com/ Twitterやinstagramなど …

Personally, I think your bike will be the closest anyone will come to getting the body shape of Kenada’s bike. Your mock up of the windshield looks to be the correct height. Looks like you’ll be raising the headrest, so it is really coming together. Fantastic job for being done in your backyard garage.

That project is simply AMAZING. I’m binge watching all of the episodes and LOVING it. Sorry I can’t speak japanese, but hope you can understand me.If you allow my opinion, I think it will be better to make the windshield using epoxy resin instead of acrylic. I mean, using acrylic, you’ll have to heat and bend the acrylic sheet to shape, which may be very tricky and time consuming and has a pretty high risk of not coming out as perfect and smooth as the result of an resin-based molded piece. And on top of that, heating up the acrylic can also have a high chance of damaging the template, unless you make a heat resistant copy of it.The only problem using the epoxy resin though is that you have to make a two-piece mold for pouring the resin in, which may be a longer process overall, but the end result has a better chance of coming out perfectly.

It may not be a perfect copy, but it’s still turning out beautifully. Congratulations on the progress so far.

This is one of the coolest DIY bike builds on YouTube, hand’s down! Can’t wait for the next part!

Super cool build! I always loved how Kaneda’s motorcycle looked, so seeing it built step by step in reality is amazing.

this is amazing! cant wait to see more of the bikes progress and finally the finished project ! great job!

This is Amazing! The only question i have is, why not semi-automatic, or TIG welding? Welding seams would probably look less messy 🙂

Sou do Brazil 🇧🇷, gostei muito do seu trabalho, suas ideias, deixou o projeto bem pratico e functional.

The build is coming along splendourisfiouly, and unlike the few other makes that I have seen either personally or online, yours stays true to the scale of the original bike, and maintains the height of the front screen. Regarding the front suspension, (as my auto translator just stopped, and at 38 I’m only one week into learning spoken Japanese. Sorry, please forgive my ignorance.) Would not the top shock absorber need to be longer, to accommodate the necessary rotation in suspension, to allow “bounce”? My reasoning: This a reason stated by a company I have worked with in the past about similar designs (https://www.plotjapan.com/brand/zero/) regarding springer forks. And an opinion shared By Indian motor cycles, BSA, And Harley Davidson. as this (well their) design reduces or mitigates stresses exerted on the weld points around the steer tube and transfers to the frame instead, leading to a longer life span of the frame in general. 😄😁

こんにちは、私はフランス人です。このバイクを赤で見ることができるのは素晴らしいプロジェクトです。 幸運を祈り、この美しい情熱を分かち合ってくれてありがとう。👍🏼💯🛵

FélicitationsSuperbe travail….👍Vivement la suite de ce magnifique projet👍bonne continuation à vous

I love this build I just found these videos today and I’m excited to see more keep up the great work

Very good looking Akira bike! Can’t wait to see it all painted and on the road! Great job!!

お疲れ様です!むしろ”改”の方がどういう仕上がりになるのか楽しみになりました!

Excelente trabajo 👍 no puedo esperar a verla terminada 😄

You could build a huge vac-u-former to form the windscreen. Might work with plexiglass.

ここまで格好よく制作されてるからオリジナルは更に格好いいバイクになりそうですね楽しみです

Big fan from the UK. A bike rider and an Akira fan since the early 90’s.Love your work so far.

お誕生日おめでとうございます!海外の方からのコメも多く、世界が注目する金田バイク製作となってきましたね!計画もしっかりされていて、本当に頼もしい限りです。大変な製作が続きますが、応援してますヨ~!!!

控え目に言って天才むしろこのシリーズ長く続いてくれた方が長く楽しめるのでありがたいです。完成したらツーリング動画とかも期待してます。遭遇した人のリアクションが凄そうw

Sponsored Link

金田バイク改、フロントサスペンションの試作とエアサス化

金田バイク改、フロントサスペンションの試作とエアサス化  (c) てるてるボーイズ

(c) てるてるボーイズ Twitterやinstagramなどでは動画になるより先に最新情報が上がることがありますので良かったらフォローよろしくお願いいたします …

I followed your build from the beginning, it’s going to be great! So creative! I love the design of the Kaneda bike and you are doing it perfectly, please keep going 🙏🤘

I know we’re not there yet, but I’m wondering at the end will he pretty up the behind the scene areas? I’m mostly referring to all the weld marks on the inner frame, and inside of the windshield. Can’t wait to see this beauty on the road.

I am so excited to see each new video you post. This bike and the Tron light cycle are what got me into sport bikes. Although there is nothing to compare to Kaneda’s bike. I can’t wait for video of this going down the street at night. I can hear the music playing already… lol. Please – you do have a red capsule jacket too right? Your skills and attention to detail are awesome.

Looking good as always, amazing how well its coming together

今回も楽しく視聴させていただきました。試行錯誤をしながら最適解を見つける作業を行っている模様は、いつもながら感嘆させられるはかりです。年末年始はゆっくり休養してたいただいた上で、年明けからマイペースでゆっくりと作業をしていって下さい。次回も楽しみにしています。

初めから感じてましたけど、本当に乗り物が好きなんだなと思って観ています。妥協しないですね、現実的に無理な事は置いといて、いつも励みになっています。今回も素敵な動画ありがとう御座います。

Très bonne présentation 🙏🏼

跨ってる姿がカッコいい。早く走行動画が見たい!でも、焦らず頑張って下さい。楽しみにしてます。

Tus vídeos son muy buenos, gracias por crear este contenido👍

進んできましたね!FRPの成型でも嬉しいですよ!エアサス化カッコいいですね、パネル周りも楽しみにしています。年末年始はゆっくりしなさって来年も素敵な制作風景アップしてくださいね。

looking forward for you to take it on the road!

綾人君、お誕生日おめでとうございます。大変な作業の連続ですが、頑張って下さい。また格好いい綾人君を期待してます。

少し前から楽しく拝見させてもらってます。燃料タンクはどこに配置するのか凄く気になります。毎回更新楽しみにしてます。頑張って完成させて下さい!

地味作業お疲れ様です。地味でもめっちゃ面白いです👍🏻コツコツ進めてるから 気づくとあら?😲ってなってて面白いです。寒くなり野外作業大変ですが 無理なさらず楽しんでくださいな。

これは凄い!完成を楽しみにしています!

Keep up the good work sir😊👍. I enjoy watching your videos. The kaneda bike is looking great👍..

muito bom!!!!!

知識とセンス、すごいね

これが量産化されたらきっと買う!

メリークリスマス!!!!!未来感を損なってないのが腕の見せ所ですねー!FRP作業動画もけっこう見ますよー

Sponsored Link

AKIRA 金田バイク製作No2 外装のモデリングをしていこう♪

AKIRA 金田バイク製作No2 外装のモデリングをしていこう♪  (c) てるてるボーイズ

(c) てるてるボーイズ Twitterやinstagramなどでは動画になるより先に最新情報が上がることがありますので良かったらフォローよろしくお願いいたします …

待ってましたー😌!!!!!!!

Parabéns pela criatividade!👏👏👏👏

This process is so fascinating. Great job!👍

THIS ! This is the content I subscribed for.You are a genius from the start and to become. I Love your videos man !!

ディテ-ルをセンスとインスピレ-ションだけで造形していくのが素晴らしいですね。

Больших успехов в постройке костом проекта ))))

丁寧だし速いし素晴らしい技量だと思います。今の時期は硬化速度が速くて大変ですが、頑張ってください!

ハンドルアップ機構まで再現されてるの凄すぎです!

what kind of tape is that aluminium surface tape? do you have to apply any mold release to keep your resin from binding to it?

凄い✨✨左右対称が1番難しいんですよね〜しかしもうセンスが良いと言うか造形感覚が優れてると言うか天才ですね٩( ´ω` )و

Awesome work!!! congrats! what is the silver tape youre using?

this looks like an old XMAX? been thinking of doing a project like this too

やっぱり金田のバイクは憧れますよね!!完成が楽しみです🤩🤩🤩

すんげぇ技術・・・もうなんでも作れそう

いやぁ、これはかなり原作に近いですね!バランスが良いわー!

数多のファンが金田のバイクチャレンジして来たけどこれには期待してる

最初のざっくり切り出したところから、すでにかっこいい。すごいセンス。

そもそも段ボールの使い方がくっそ上手い…最高じゃん

お!遂に!!完成が楽しみです!頑張ってください💪

段ボールの型作り凄いですねー!! こんな巧みに段ボールをあやつるのは綾人君ともう中くらいですよ!!!ww

もらったTW200のエンジンをかけてみよう!

もらったTW200のエンジンをかけてみよう!  (c) てるてるボーイズ

(c) てるてるボーイズ TwitterID @partner1107 綾人 Instagram teru_teru_boys.ayato ステッカーはこちらから てるてるボーイズオンラインショップ↓ …

ほんと、スイングアーム変えると雰囲気変わるな〜、かっこいいここにさらにフェンダーつけてるtwとか見ると、いよいよ気づかないw

どんな完成になるか楽しみだー

最近twまた流行ってきたかな?嬉しいな〜、昔からすきなんだよなー

創るものに常に愛と情熱感じるわ!

TWとビラーゴ両方とも好きなバイクなので融合感めっちゃカッコイイです☺︎

こんにちは。TWは四角いタンクより丸いタンクのほうがかっこいいですね!どの様になるのか楽しみにしています。

最近チャンネル登録させていただきましたー!めちゃくちゃセンス良くて見てて楽しいのでこれからも頑張って下さい!

弐号機と同時進行ですね(^^♪綾人さんって結構身長があるんですか??TW がすごく小さく見えます!

お疲れさんです!久しぶりに音聞きました(笑)エンジン元気で良かったです。

TWも素材として楽しそうですね!

TWのカスタムどうなるか、楽しみです!

twは改造車が多いけどこれはアメリカンっぽいなwパっと見もうtwにみえないw

う~ん、王道とな?それはそれで仕上がりが楽しみではある(^^b

このTWのホイールは前後とも純正ですか!?

良いですね♪作業場、困らなくて!

こんなにイジってもらって、バイク嬉しいだろうな😆

tw好き〜 シリーズに期待!

tw すでにカッコいいですね!

相変わらず凄いなぁ

元々付いてたタンクはsrのタンクですか?

ヘッドライトを付ける!ライトカバーなどなど作っていくよ♪金田のバイク改製作プロジェクト

ヘッドライトを付ける!ライトカバーなどなど作っていくよ♪金田のバイク改製作プロジェクト  (c) てるてるボーイズ

(c) てるてるボーイズ Twitterやinstagramなどでは動画になるより先に最新情報が上がることがありますので良かったらフォローよろしくお願いいたします …

This build has been incredible. It’s easily one of the most true to source material replicas of the Akira bike, and was made from a salvaged bike. Keep up the amazing work!

For the issue of the engine touching the ground when the suspension is fully lowered, i recommend installing an skid plate, made of thick aluminium. Congratulations for your excellent work.

I wish to thank you. Watching your videos has taught me several refinements and technique in molding fiberglass/resin layups. The trick of using aluminum home-insulation tape has already saved me considerable trouble in a pair of small projects demanding relatively precise fiberglass moving parts. ありがとうございました!for making an acrylic windscreen/cowl… you can heat and then vacuum-form acrylic. A small vacuum-table and a molding buck will work. The difficult part is in pre-treating the acrylic to remove water from it. Acrylic is hygroscopic, and its temperature of permanent plastic deformation is above water’s boiling temperature. If there is moisture in the acrylic, it will produce steam and bubbles which will mar the appearance, structure, and clarity of the cowl. Have you considered using some other plastic – either one you can cast and then polish to clarity, or a non-hygroscopic thermoplastic?

Eu to adorando os videos! N�o vejo a hora de ver sua moto finalizada!

Your panel work is superb, love the detail and functionality.

As a big fan of motorcycles and Akira, I just can’t wait to see more. Arigatou for sharing you work with us !And I also love the way you work. Thanks a lot from France.

Me encanta tu trabajo con esta replica de la moto de Kaneda!! Estoy deseando verla terminada. Enhorabuena y saludos desde Espa�a.

毎回楽しく観てます。エンジニアでありアーティストですねダンボールから作ったと思えないFRPの全体のバランスが素晴らしい

Absolutely amazing.You make it look so simple.

今回も楽しく視聴させていただきました。作業内容に関して色々なコメントがあるようですが、作業内容の濃密さと、編集内容の良さでついついアレコレ言いたくなってしまうのかもしれませんね。それだけ面白い内容の動画ですから、マイペースで納得いくまで作業をしていって欲しいですね。

今日も面白かったです。車もバイクも乗らないのですがすごい楽しいです。制作上の問題への対処をスイスイと解決したり、修正のために何度も同じ作業をする根気がすごいなあって憧れます。

本当に慎重に進めていってるのわかります。見てるだけでそのアイディアに驚かされてます

Your fiberglass work is amazing, super cool bike, I remember skipping school and watching Akira for the first time with a friend, good times

Quel travail, c’est magnifique !

Once you finish all the body/fairing parts, are you going to make a final mold and create a cleaner body fairing? The body would be stronger and more finished look. You could also sell the fairing if you do that. I would certain consider buying one.

it’s perfect to get home and have a new video of this amazing project!!

いつも楽しく拝見させて頂いております!接地時のローラーの件ですが、センターに付ければ目立たないかなと素人なりに思いました。動画を見ながら新型刀のロングテールを作ってみようかなと最近思っています!

How much have you spent on this project? One day if I have the money,time and resources I want to do something like this. I don’t that amount of rake on the forks is legal in Australia though.

Totally amazing how you make the body panels!! 👍🏼👌🏼 👍🏼 👌🏼

やっぱり未来をイメージしたバイクって実際に形にすると難しい所が多いんですね。毎回凄くワクワクして見てます。ご苦労様です😊

コメント

タイトルとURLをコピーしました