DIY just do（おすすめch紹介）

Few people know this function of the old piston!

(c) DIY just do　My friends, my name is Eugene! I’m the author of the channel. lots of ideas. I’m putting everything I’ve done with my hand on this channel. Creative Ideas, useful …

Great Stuff!! We used top use a worn piston to do a re-bore job by wrapping it with emery cloth and working it up and down in the bore. Without the rings, of course, Then try the oversize piston until it felt right. Then, new rings. Used to work with the old Fords anyway. Also if you cut a piston across in line with gudgeon pin it makes a fine ash tray.

All I’ve ever seen this guy do is provide solutions to problems that don’t exist

Genial . cordial saludo desde CDMX 🇲🇽

it will move left and right eventhough with a new piston

Suckered in again looking for something of possible interest. And once again, failed in that idea. I wish he would move beyond the mundane things and make something really amazing…just once!

Cool Hideki Inspiring Good = 3

Best creative you are🥰😘🧡👍

Молодец 👍

Hello mister very good job good idea very well done my friend

Good idea

achtung , anschag soll / muss rechts sein , schade um die wasserwaage !

That’s really awesome i

M�xima categor�a en guevada.

👍

Good idea!

Piston broke!?

I really must stop qatching these totally USELESS DIY “tips”

Some of these people need 2 get a job and buy the right TOOLS 🔧 🙄 😒 😑

very good

Super

Now I will show you how to make a machine from a drill !!

(c) DIY just do　My friends, my name is Eugene! I’m the author of the channel. lots of ideas. I’m putting everything I’ve done with my hand on this channel. Creative Ideas, useful …

Muito bom! Show de ⚽! 👏👏👏👏👏👏

Esta bien la idea solo hay que tener cuidado a la hora de ajustar el mandril por el torque y las revoluciones dependiendo de la marca del taladro, saludos

Good job. Horrible idea. Table saws are precise, ajustable and more or less safe. This thing isn’t any of that.

�Genial gracias !

That is very intelligently done

because real saws aren’t dangerous enough!

Excelente Eugenio. Gracias

bicie tarczy niezłe 😀

Good idea Just do good job well done

Long days deserve a climate controled shop.

Es buena idea faltan las medidas

Por que se ve el torque al revez_? ajusta ala izquierda!!!!

Good job very good..

La manera que sostiene la hoja es peligrosa !!! La puede soltar el drill

WTF Why is everything reversed here. All the the screws turn left !

¿Usted Edita o Filma con espejos?. Los títulos de las marcas de discos aparecen invertidos ! (Hice cine años ! 😀)

Todas las roscan son izquierdas ?????

얘야 원형스킬 비싸지않다 정상적인 제품으로 안전공사하자

Why is the video mirrored?

Nice workpiece

Brilliant idea!! I did and didn’t regret it.

(c) DIY just do　My friends, my name is Eugene! I’m the author of the channel. lots of ideas. I’m putting everything I’ve done with my hand on this channel. Creative Ideas, useful …

Parabens. Muito criativo, para quem n�o tem muitos recursos, t� na boa. Mas acho que vc tem como melhorar essa feramenta. Normalmente qdo vc deforma “tubos” para trabalhos que exijam curvaturas, um problema s�rio s�o as deforma��es n�o aceit�veis, que “amassam” o tubo nas curvas, para isso pode-se usar roldanas tipo carretel, no diametro do tubo (uma para cada tipo de diametro), vai ficar bem mais perfeito nas curvas. N�o estou te criticando, e dizendo que teu trabalho � uma bosta, como muitos fazem por ai, apenas uma observa��o para dar mais qualidade ao produto final. Abra�os. E n�o pare, continue criando, a cabe�a nossa de cada dia � para isso mesmo.

Se o t�tulo fosse “Como fazer uma calandra”, acho que seria bem mais f�cil encontrar no Youtube e, consequentemente, mais views, do que esses t�tulos gen�ricos.

Należało do tej rurki nasypać piasku do pełna i zaślepić, wtedy rurka by się nie płaszczyła.

Mais f�cil fazer uma calandra com tr�s tubos e fazer uma circunfer�ncia de 360� do que fazer esse trabalh�o todo para enrolar s� 160� ??

great idea 😉

thank you it is vry vry vry goooood

Ing�nieux le g�nie

Great

Good job my friend well done

👍👍👍👏🤝

Wie hast du das Trapezgewinde in den Stahlklotz geschnitten??

und weshalb ist das Video seitenverkehrt?why is the video inverted?

me pone nervioso la morsa con la rosca invertida jaja

Super 👍

good, like!

The clickbait was more interesting.

bravissimo

ALGO TOTALMENTE INUTIL y antifuncional

NOT GOOD !!!!!!!!

Here’s what Happens when a Woman picks up a Man’s tools

(c) DIY just do　My friends, my name is Eugene! I’m the author of the channel. lots of ideas. I’m putting everything I’ve done with my hand on this channel. Creative Ideas, useful …

Don’t do any of this. All wrong and dangerous to builder, users and tools. Don’t drill sheet metal in your hand I got the stitches and scars to prove it. Don’t put home made non-balanced anything on your grinder. Don’t cover the cooling air vents on your power tools. Don’t prepare food with unsanitary shop tools and containers. Just say no to all of it.

PAINFUL to watch someone totally inept at handling BASIC hand tools as well as power tools. Totally out of her depth is an understatement.

A lot could be (and has been) said about safety. That aside, I like your ingenuity.

I would be concerned of contamination and any excess getting into the vents, but otherwise this made me chuckle. I like the ingenuity.

Good thinking on her part. Now make an adapter that allows the shaft to come up from the bottom of the tub, that keeps the motor away from the candy. Three smaller holes in the lid might allow the candy to dry faster. maybe use a fan motor for slower rpm. Interesting woman. 🙂

Wow tnx for the idea .. gonna buy a bigger pad lock tomorrow

Just too cruel dude! You didn’t even tell her when she had the drill in reverse! 😉

You are going to get somebody hurt. Please don’t do this sort of thing. While this is a neat project, your tool safety is just not there. You would be fired from most job sights. Please don’t enable this danger to your followers because it’s a fantastic way to get hurt.

In a previous life I designed machinery for food processing. The stuff was all stainless steel, with electrical components like motors and programmable controllers sealed up to survive daily hose-down with some sort of nasty caustic solution. Don’t use just any old crap to handle anything someone is going to eat. It’s amazing what noxious stuff grows on it overnight if it’s not specifically designed for sanitary operation. And in another previous life I designed the thermal control system for a modest space vehicle. Cooling is vital even when NASA is paying the bills. Those holes at the ends of the grinder are necessary for the needed air flow. They won’t work if they’re covered up.

🤣🤣🤣🤣…… OMG!!!! Never in my life would I have thought about doing something like this with a grinder!!!! This is awesome!!!!

What happens when the grinder overheats and ignites the very fine sugar strands which then sets fire to the plastic bowl and ………….

That reminds me of something the coyote would try and kill the roadrunner with

Now I understand why Russian men drink to much.

This women is “nice” crazy…..the whole time I must laugh , because she used a pink plasticbox….haha……like women doe….haha…..!!! I think she was “normal” , til she met Eugene….haha !!! NO FRONT !!! I love you 2 !!! Be blessed ….the whole family !!!

Not something to try at home and the tool safety is appalling

No s� qu� es m�s in�til, el “invento” o la mujer que lo hizo. Poner cualquier objeto a esa velocidad de rotaci�n requiere de ciertos conocimientos para evitar lesiones propias o a terceros.

I can feel the cuts from this

admittedly, they didn’t look like a man’s tools at first. >shrug<

todas as mulheres que eu conhe�o fariam coisas muito mais interessantes doque isso eu ainda perdi meu preciso tempo com isso

My God, that was painful to watch…

COOL IDEA FOR THE WORKSHOP of the motor from the washing machine!!

(c) DIY just do　My friends, my name is Eugene! I’m the author of the channel. lots of ideas. I’m putting everything I’ve done with my hand on this channel. Creative Ideas, useful …

So at your place you weld cast iron onto a tubular steel frame with MIG. Why don’t you just use all-purpose glue right away?

Belle réalisation bravo à bientôt salut Jeannot 😉🛠

nice, bro!! I like it